Yamaha CDX-E100RDS Owner's Manual - Page 16

USING THE BUILT-IN TIMER Setting the clock You must set the clock before you use the timer functions. The clock is based on a 24-hour system. DISPLAY HOUR MIN NATURAL SOUND STEREO RECEIVER RX-E100 VOLUME DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING STANDBY/ON PHONES TIME ADJ TIMER BASS HOUR PTY SELECT MIN TREBLE BALANCE MIN MAX INPUT -+ -+ LR Adjusting the brightness of the display You can adjust the brightness of the display. If you have connected the CD player (CDX-E100), cassette deck (KX-E100), and/or MD recorder (MDX-E100) to this unit, the brightness of the displays is automatically adjusted to that of this unit. DISPLAY NATURAL SOUND STEREO RECEIVER RX-E100 VOLUME TIME ADJ PRESET/BAND 1 While the power is on, press DISPLAY to display the time. 2 While holding TIME ADJ, press HOUR to set the hour. • If you want to move the time in the reverse direction, press HOUR while holding TIME ADJ and PRESET/ BAND. 3 While holding TIME ADJ, press MIN to set the minutes. • If you want to move the time in the reverse direction, press MIN while holding TIME ADJ and PRESET/ BAND. To display the clock Press DISPLAY. The current time appears for about 8 seconds, then the normal display returns. Note • In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock. DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING STANDBY/ON PHONES TIME ADJ TIMER BASS HOUR PTY SELECT MIN TREBLE BALANCE MIN MAX INPUT -+ -+ LR INPUT Press and hold DISPLAY for about two seconds so that "Dimmer ±0" appears on the display. While holding DISPLAY, turn INPUT clockwise to increase or counterclockwise to decrease brightness. Control Range: ±0 to -6 (Preset value: ±0) E-14