Yamaha CDX-E100RDS Owner's Manual - Page 6
Connecting the speakers
View all Yamaha CDX-E100RDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
GETTING STARTED Connecting the speakers Never plug the AC power cord to the wall outlet until all connections are completed. Follow the steps as shown below to connect the system using the supplied cords and accessories. Right speaker 3 FM antenna 2 AM loop antenna Left speaker FREQUENCY STEP B L TAPE R OUT L MD R D 75 Ω UNBAL FM ANT GND AM ANT A E R L CD IN IN AUX 6 Ω MIN./SPEAKER C SPEAKERS 1 SUBWOOFER OUT SYSTEM CONNETOR 4 To wall outlet 1 Connect the Speakers. 1 Unscrew the knob. 2 Remove approx. 5 mm (1/4") of insulation from each of the speaker wires and insert the bare wire into the terminal. 3 Tighten the knob to secure the wire. Red: positive(+) Black: negative(-) 2 1 3 2 Connect the AM Antenna. Set up the AM loop antenna, then connect it. 3 Connect the FM Antenna. 75 Ω UNBAL FM ANT 4 Connect the AC power cord to a wall outlet. • Use external FM/AM antennas if you need better reception. Consult your dealer. • The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall. To Connect the Subwoofer (optional) You can reinforce the bass frequencies by adding a subwoofer (optional). Connect the SUBWOOFER OUT terminal of the unit to the INPUT terminal of the subwoofer. GND AM ANT E-4