Yamaha CLP-320 Owner's Manual - Page 13

11 ENGLISH Before Using Connecting the Power Cord Read the instructions below very carefully to make sure that you correctly connect the power cord. 1. Insert the plug on one end of the power cord to the [AC IN] connector. Refer to the "Part Names and Functions" on page 11 for information on the location of the [AC IN] connector. 2. Insert the plug on the other end of the power cord to a standard AC outlet. 1 2 (Bottom of the keyboard) (The shape of the plug differs depending on locale.) WARNING Make sure your Clavinova is rated for the AC voltage supplied in the area in which the piano will be used. (The voltage rating appears on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may even pose a shock hazard! Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! The type of AC power cord provided with the instrument may be different depending on the country in which the instrument was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify the plug provided with the instrument. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Turning the Power On Press the [POWER] switch on the right end of the keyboard to turn on the power to the unit. The power indicator located below the left end of the keyboard lights up. [POWER] Power indicator Press the [POWER] switch again to turn off the power to the unit. The power indicator turns off. Power indicator If you forget to turn off the power to the piano and close the key cover, the power indicator will remain lit, indicating that the power is still on. CAUTION A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument for a long period of time, be sure to unplug the instrument from the AC outlet. CLP-320 Owner's Manual 13