Yamaha CLP-625 CLP-625 Owners Manual - Page 12

Setting Up Turning the Power On 1. Connect the plugs of the AC adaptor in the order shown in the illustration. DC IN jack (page 10)  AC outlet DC plug   Power cord AC adaptor AC plug The shape of the plug and outlet differ depending on the locale. WARNING Use the specified adaptor (page 33) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTE Follow this procedure in reverse order when disconnecting the AC adaptor. 2. Press the [1] (Standby/On) switch to turn the power on. [1] (Standby/On) switch CAUTION Even when the [1] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. Setting the Volume When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound. Level decreases Level increases CAUTION Do not use this instrument at a high volume level for a long period of time, to avoid damaging your hearing. Auto Power Off Function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for approximately 30 minutes. If you do not want to use the Auto Power Off function, disable the function as described below. The setting (disabled or enabled) is retained even if the power is turned off. Default setting: Enabled Power indicator Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you're ready to turn the power to standby, press the [1] (Standby/On) switch again for a second. The power indicator turns off. 12 CLP-625 Owner's Manual Disabling the Auto Power Off function When the instrument is turned off While holding down the A-1 key (the lowest key), press the [1] (Standby/On) to turn the instrument on. The [REC] indicator flashes three times, indicating the Auto Power Off function has been disabled. Lowest key