Yamaha CLP-625 CLP-625 Owners Manual - Page 31
Secure C., Mount A., Connect the pedal cord and the AC, adaptor.
View all Yamaha CLP-625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-3 Insert the other two tapping screws (4 x 20 mm) into the other two screw holes to secure B. 2-4 Securely tighten the screws on the top of B that were attached in Step 2-1. 3. Secure C. Securely tighten the screws on C that were attached in Step 1-3. 5. Secure A. 5-1 Keyboard Stand Assembly 5-2 3 4. Mount A. Be sure to place your hands at least 15 cm away from either end of the main unit when positioning it. Align the screw holes. 5-1 Adjust the position of A so that the left and right ends of A will project beyond D and E equally when seen from the front. 5-2 Secure A by tightening the short screws (6 x 16 mm) from the front. 6. Connect the pedal cord and the AC adaptor. 6-1 6-2 At least 15 cm CAUTION • Be extra careful not to drop the main unit or let your fingers be pinched by it. • Do not hold the main unit in any position other than the position specified above. 6-4 31 CLP-625 Owner's Manual