Yamaha CVP-305 Owner's Manual - Page 112

Style Creator Style Assembly (ASSEMBLY) Style Assembly allows you to create a single Style by mixing the various patterns (channels) from existing internal Styles. 1 Select the basic Style, then call up the display for Style Assembly. The operation steps are the same as steps 1-4 in "Realtime recording" (page 108). In step 4, select the ASSEMBLY tab. 2 Select the desired section (Intro, Main, Ending, etc.) for your new Style. Call up the SECTION display by pressing one of the Section buttons ([INTRO]/[MAIN]/[ENDING],etc.) on the panel. Change the section as desired by using the [6π†]/[7π†] buttons and execute the operation by pressing the [8π] (OK) button. Using, Creating and Editing the Auto Accompaniment Styles Indicates the channels that make up the section. Section display 3 Select the channel for which you wish to replace the pattern by using the [A]-[D] and [F]-[I] buttons. Call up the Style Selection display by pressing the same button again. Select the Style containing the pattern you want to replace in the Style Selection display. To return to the previous screen, press the [EXIT] button after selecting the Style. 4 Select the desired section of the newly imported Style (chosen in step 3 above) by using the [2π†]/[3π†] (SECTION) buttons. 5 Select the desired channel for the section (chosen in step 4 above) by using the [4π†]/[5π†] (CHANNEL) buttons. 6 Repeat steps 3-5 above to replace the patterns of other channels. 7 Press the [J] (SAVE) button to call up the Style Selection display, and save your data from the display (page 63). CAUTION The recorded Style will be lost if you change to another Style or you turn the power off without executing the Save operation (page 63). 112 CVP-305/303/301 Owner's Manual