Yamaha CVP-96 Owner's Manual - Page 48
Setting the Effect Depth, Restoring the Basic Settings
View all Yamaha CVP-96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Voice Effects Setting the Effect Depth The Effect Depth parameter lets you adjust the degree or depth of the currently selected effect type. To set this, press R1 DPT or MIC DPT (to highlight the corresponding parameter), and use the data dial or [-/+] buttons. Depending on the currently selected voice, the R1 DPT indication may automatically change to the R2 DPT, or L DPT. Use MIC DPT to set the Effect Depth applied to the microphone input connected to the [MIC.] jack. Effect Depth • Range: 0 (no effect) - 100 (maxi- mum) • Basic setting: Differs depending on the voice. (microphone = 0) • Backup of last settings: OFF • If the Effect Depth is set to 0, the [EFFECT] lamp will not light. The following parameters can be selected by first selecting the corresponding voice from the main display of the Dual or Split modes. R1 DPT R2 DPT L DPT First voice of Dual mode or right voice of Split mode Second voice of Dual mode Left voice of Split mode Pressing R1 DPT or MIC DPT also advances the value. To reset the value to the basic setting, simultaneously press the [-/+] buttons. Restoring the Basic Settings You can easily restore the basic settings of the selected voice's EFFECT TYPE and R1 DPT parameters by pressing RESET in the display. 46 CVP-98/96/600 46