Yamaha DKC-900 Disklavier Control Unit DKC-900 Owners manual - Page 19
Getting Started, Connecting the AC Power Cable
View all Yamaha DKC-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2Chapter Getting Started Connecting the AC Power Cable 1 Connect the AC power cable extending from the piano to the AC wall outlet. This connection provides power to the autoplay piano. Grand piano Upright piano Warning: Use the AC power cable attached to the piano. Use of other AC power cables may result in damage, overheating, or fire. English 2 Connect the power cord connected to the DKC-900's power adaptor. This connection supplies power to the control center unit and the switch box. Connect the plugs of the AC adaptor in the order shown in the illustration. In the upright piano, the DC plug of the power adaptor is connected to the DC IN terminal beforehand. DC IN jack DC plug Power cord AC adaptor AC outlet AC plug Caution: • Do not stretch the cable or bend its ends. • Do not attempt to use the cable if it is stretched or if the ends of the cable have been bent. Attempting to do so may cause interruptions to the power supply. • Always turn off the main unit power before disconnecting the AC power cable. • When you wish to move the piano, unplug the AC power cable from the AC outlet before proceeding. • Unplug the AC power cable from the AC outlet if you do not intend to use the instrument for an extended period of time. 13