Yamaha DM2000 Studio Manager Owner's Manual - Page 23

Master Layer Channels 20 Master Layer Channels When the Master Layer is selected in the Master Section, the Bus Outs, Aux Sends, and Matrix Sends can be selected. A Bus Out is shown below. Aux Sends and Matrix Sends appear the same except that they do not have a STEREO button. A STEREO button (Bus Out only) This button is used to route the Bus Out to the Stereo Out. B INSERT button This button is used to turn on and off the Bus Out's Insert. 1 C COMP button This button is used to turn on and off the Bus Out's Compressor. D Compressor curve display 2 This display shows the Compressor's curve. E EQ button This button is used to turn on and off the Bus Out's 4-band Para- C metric Equalizer. D F EQ curve display This display shows the Equalizer's curve, which can be set by 5 dragging. 6 G DELAY button 7 This button is used to turn on and off the Bus Out's Delay func- 8 tion. I H Delay time This parameter is used to set the delay time of the Delay func- tion. Delay times can be set by dragging. I Channel number Displays the Channel number of the channel. J AUTO button This button is not used in Version 1.0 of Studio Manager for DM2000. K SELECT button This button is used to select the Bus Out. J L SOLO button K This button solos the Bus Out and is colored orange when the L channel is soloed. M N M ON button This button turns the Bus Out on and off. It is colored orange when the channel is turned on. O N Short Channel name This is the channel's Short Channel name, which can be edited. To edit the name, click it and type. O Channel Fader This control is used to set the level of the Bus Out. P P Channel Meter This meter displays the signal level of the Bus Out. Studio Manager-Owner's Manual