Yamaha DSP-E200 Owner's Manual - Page 12

6 Turn up the volume by using the remote control transmitter. You will hear a test tone (like pink noise) from the left front speaker, then the center speaker, then the right front speaker, then the rear speakers, for about two seconds each. The display illumination changes as shown below. Front (L) Center DELAY TEST ms NORMAL WIDE F C R PHANTOM PRO LOGIC CONCERT MONO ROCK CONCERT ENHANCED VIDEO MOVIE CONCERT HALL Rear (L and R) Front (R) * The test tone from the left rear speaker and the right rear speaker will be heard at the same time. 7 Make the sound output level of the center speaker the same as that of the front speakers. Illuminates. CENTER LEVEL _ + DELAY TEST ms NORMAL FCR PRO LOGIC CONCERT MONO ROCK CONCERT ENHANCED VIDEO MOVIE CONCERT HALL Adjustable. 8 Make the sound output level of the rear speakers the same as that of the front speakers. REAR LEVEL _ + Illuminates. DELAY TEST ms NORMAL WIDE F C R PHANTOM PRO LOGIC CONCERT MONO ROCK CONCERT ENHANCED VIDEO MOVIE CONCERT HALL Adjustable. 9 TEST DELAY TEST ms NORMAL WIDE F C R PHANTOM PRO LOGIC CONCERT MONO ROCK CONCERT ENHANCED VIDEO MOVIE CONCERT HALL Stop flashing and disappears. Notes q Once you have completed these adjustments, use only this unit's VOLUME control to adjust listening volume. Do not change any other volume settings in this unit. q If the connecting way of your components is B or C shown on pages 7-8, also adjust the volume control(s) on the integrated amplifier or power amplifier to achieve proper balance. q In step 7, if the center mode is in the "PHANTOM", the sound output level of the center speaker can not be adjusted. Because in this mode, the center sound is automatically output from the left and right front speakers. 12