Yamaha DSP-E200 Owner's Manual - Page 14
To Play Source With The Digital Sound Field Processor - sound processor
View all Yamaha DSP-E200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TO PLAY SOURCE WITH THE DIGITAL SOUND FIELD PROCESSOR 2 3 1,6 5 1 VOLUME 0 - dB ∞ Set to the " " position. 2 POWER 4 Play the source. 5 Select a desired program suitable for the source. CENTER TEST MODE DIGITAL SOUND FIELD PROCESSING CONCERT MONO ROCK CONCERT PRO LOGIC ENHANCED VIDEO MOVIE CONCERT HALL OFF DOLBY SUR. PRO LOGIC 3 Select a source using the input selector on the integrated amplifier etc. * To select a tape deck connected to this unit's TAPE terminals, set the TAPE MONITOR switch to on. (Otherwise, set this switch to off.) TAPE MONITOR Note If this unit is connected to the TAPE REC OUT terminals of the integrated amplifier etc., the following operations should be done. • If your amplifier has the REC OUT selector which is independent of the input selector; 1. Set the input selector to the AUX position. 2. Select the source to be input to this unit using the REC OUT selector. • If your amplifier does not have the REC OUT selector which is independent of the input selector; 1. Set the TAPE monitor switch on the amplifier to on. 2. Select the source to be input to this unit using the input selector. 14 The corresponding indicator will illuminate. 6 VOLUME 0 - dB Adjust to the desired output level. 7 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on the next pages.)