Yamaha KX-493 Owner's Manual - Page 6

To adjust the headphones level, DOLBY NR button setting in step 2

Page 6 highlights

To stop playback: Press the & button. To fast forward the tape: Press the ⁄ button. To fast rewind the tape: Press the ! button. To adjust the volume level: Use the volume control of the amplifier or receiver. To use headphones for private listening: Insert the headphones plug into the PHONES jack. To adjust the headphones level: Use the PHONES LEVEL control. PLAY TRIM control adjustment When the level of high frequencies is too boosted or absent while playing a tape recorded on another cassette deck, adjust the high frequency response with the PLAY TRIM control. When high frequencies are too boosted, attenuate the high frequencies. When high frequencies are absent, boost the high frequencies. KX-493 PLAY TRIM PLAY TRIM 0 0 DOLBY NR button setting (in step 2) DOLBY NR (OFF/ B/ C/MPX) button Be sure to set the DOLBY NR (OFF/ B/ C/MPX) button according to the system used for recording. Each time this button is pressed, Dolby NR switches as follows: 3 B(MPX OFF) For a tape recorded with DOLBY B NR Only the B indicator lights. ∞ C(MPX OFF) For a tape recorded with DOLBY C NR Only the C indicator lights. ∞ B MPX ON (available only for recording) ∞ C MPX ON (available only for recording) ∞ OFF For a tape recorded with DOLBY NR OFF No indicator lights. Note: The MPX filter settings are explained on page 9. NR-OFF 10 dB 10 dB B-NR C-NR KX-393 PLAY TRIM 0 PLAY TRIM 0 10 dB 100 1k 1 2 3 10kHz 1 High frequency sound is too boosted. 2 Flat. 3 High frequency sound is absent. Noise Reduction Responce 20 100 1k 10k 20k Hz 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

6
To stop playback:
Press the
&
button.
To fast forward the tape:
Press the
/
button.
To fast rewind the tape:
Press the
!
button.
To adjust the volume level:
Use the volume control of the amplifier or receiver.
To use headphones for private listening:
Insert the headphones plug into the
PHONES
jack.
To adjust the headphones level:
Use the
PHONES LEVEL
control.
DOLBY NR button setting (in step 2)
DOLBY NR (OFF/
B/
C/MPX) button
Be sure to set the
DOLBY NR (OFF/
B/
C/MPX)
button according to the system used for recording.
Each
time this button is pressed, Dolby NR switches as follows:
B(MPX OFF)
For a tape recorded with DOLBY B NR
Only the
B indicator lights.
C(MPX OFF)
For a tape recorded with DOLBY C NR
Only the
C indicator lights.
B MPX ON
(available only for recording)
C MPX ON
(available only for recording)
OFF
For a tape recorded with DOLBY NR
OFF
No indicator lights.
Note
: The MPX filter settings are explained on page 9.
PLAY TRIM control adjustment
When the level of high frequencies is too boosted or
absent while playing a tape recorded on another cassette
deck, adjust the high frequency response with the
PLAY
TRIM
control.
When high frequencies are
absent, boost the high
frequencies.
When high frequencies are
too boosted, attenuate the
high frequencies.
20
100
1k
10k
20k
Hz
10 dB
10 dB
Noise Reduction Responce
NR-OFF
B-NR
C-NR
3
KX-493
KX-393
PLAY TRIM
PLAY TRIM
0
0
PLAY TRIM
PLAY TRIM
0
0
100
10 dB
1k
10kHz
1
2
3
1
High frequency sound is
too boosted.
2
Flat.
3
High frequency sound is
absent.