Yamaha MCX 1000 Owners Manual - Page 18

Removing the side-panel cover, Remote control

Page 18 highlights

Before setup Removing the side-panel cover 1. Push the tab down firmly. Remote control I Loading the battery for the remote control 2. Slide the cover away from the MusicCAST client casing. 102_Musiccast_E.p65 18 1. Slide out the battery holder from the remote control by pushing into the hole in the holder with a ball-point pen, etc. Note • The casing is very stiff, and may require significant pressure to remove. 2. Place the battery in the holder, positive side upward. 3. Slide the holder into the remote control. I Battery replacement If you find that the remote control must be used closer to the main unit than usual, the battery is weak. Replace the battery with new one. I Notes on the lithium battery Please take care when using the lithium battery as it may explode if mistreated. • Never abuse or disassemble the battery. • Be sure the battery polarity is correct. If it is not installed correctly, it may cause fire or explosion. • Avoid placing the lithium battery and also the remote control with the battery installed, in high temperature such as direct sunlight. • Do not recharge the battery. • When replacing the battery, make sure to only use a CR2025 battery. • Keep the battery out of reach of children. If swallowed, get immediate medical help. • When disposing of the battery, insulate it with tape, etc. Never dispose of it in fire. Also, dispose of the battery according to local regulations. • If the battery leaks, dispose of it immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Skin contact may cause a burn. If it occurs, wash the affected area with water promptly and get medical attention. 18 2003.06.04, 16:08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Before setup
18
Removing the side-panel cover
1.
Push the tab down firmly.
2.
Slide the cover away from the
MusicCAST client casing.
Remote control
Loading the battery for the remote
control
1.
Slide out the battery holder from the
remote control by pushing into the hole
in the holder with a ball-point pen, etc.
Note
The casing is very stiff, and may require
significant pressure to remove.
2.
Place the battery in the holder, positive
side upward.
3.
Slide the holder into the remote control.
Battery replacement
If you find that the remote control must be used
closer to the main unit than usual, the battery is
weak. Replace the battery with new one.
Notes on the lithium battery
Please take care when using the lithium battery as it
may explode if mistreated.
Never abuse or disassemble the battery.
Be sure the battery polarity is correct. If it is not
installed correctly, it may cause fire or explosion.
Avoid placing the lithium battery and also the
remote control with the battery installed, in high
temperature such as direct sunlight.
Do not recharge the battery.
When replacing the battery, make sure to only use
a CR2025 battery.
Keep the battery out of reach of children. If
swallowed, get immediate medical help.
When disposing of the battery, insulate it with
tape, etc. Never dispose of it in fire. Also, dispose
of the battery according to local regulations.
If the battery leaks, dispose of it immediately.
Avoid touching the leaked material or letting it
come in contact with clothing, etc. Skin contact
may cause a burn. If it occurs, wash the affected
area with water promptly and get medical
attention.
102_Musiccast_E.p65
2003.06.04, 16:08
18