Yamaha MDX-E300 Owner's Manual - Page 25

EEnngglliisshh Display messages Can't copy Digital recording cannot be performed. (See "SCMS Serial Copy Management System" on page 22.) Can't edit! Edit operations are not possible. Can't REC! Recording is not possible. The loaded disc may be protected or there may not be enough blank space remaining on the disc. Can't REC Recording is not possible. The loaded disc may be damaged. DIG in Unlock No digital signal is being input to the selected digital input jack. TMP Over!! The temperature of the unit has exceeded the normal operating temperature. Turn off the unit and let it cool down. If the unit is installed in a place with little ventilation (such as a built in bookcase), move the unit to another location with better ventilation. Disc Full Recording is not possible because there is no blank space remaining on the disc. Title Full! Additional characters cannot be input for the current title because the maximum number of characters for a single title (250) has already been input. UTOC W Error Error occurred when writing to the UTOC. Not Audio The inserted disc is not an audio MD. Tr Protected The selected track cannot be edited because it is protected. TOC Full The disc area allotted for TOC data has become full and further editing is not possible. UTOC Err L0~4 Problem involving UTOC data. ADDITIONAL INFORMATION TOC Writing The TOC data is being written to the disc. Do not move the unit or pull out the mains lead. If you do, recorded material may not be saved normally. TOC Reading The unit is reading the TOC data. Protected The record protection on the inserted MD is set to "protect". PlayBack MD The inserted MD is a designed for playback only (you cannot record on this disc). Monitor Out The monitor out function is active. The audio signal input to the selected input terminals is output from this unit's output terminals. No Track Blank disc is played or searched. 23