Yamaha MDX-M5 Owner's Manual - Page 35

English GettPinlagyiSntgarCteDds ADDITIONAL INFORMATION Display messages When using the unit, the following messages may appear in the display. The meaning of the displayed messages are: DISPLAYED MESSAGE NO DISC UNLOCK SCMS ON Not Audio DISC FULL TITLE FULL BLANK DISC NO TRACKS READING WRITING DISC ERROR EDIT NOW! CAN'T EDIT ok? (blinking) PROTECTED PLAY ONLY MEANING There is no disc in the unit. Insert a disc. No digital signal being input to the selected digital input jack. An attempt is made to record digital signal from a source while its digital copy has been prohibited by SCMS. The inserted disc is not an audio MD. Recording is not possible because there is no blank space remaining on the disc. Additional characters cannot be input for the current title because the maximum number of characters for a single title (80) have already been input. The disc does not contain any recordings. The disc does not contain any tracks but has a disc title. The unit is reading the TOC data. The unit is writing the TOC data. Problem involving TOC data. The editing operation is in progress. Edit operations are not possible because of MD system limitations. This is message for confirming if editing can really be performed. The record protection on the inserted MD is set to "protect". The inserted MD is a designed for playback only (you cannot record on this disc). REMEDY Insert a disc. Make sure the connection for digital recordings are correct. Use analog recording. Insert an audio MD. Change the disc with enough blank for recording. Erase some characters. Change the recorded disc. Record some on the disc. This is normal operation. This is normal operation. Erase all tracks. If not possible, use another MD. This is normal operation. Perform editing following the restrictions. Press ENTER to perform editing. See "Notes about handling MDs" on page 27. Insert the recordable MD. E-29