Yamaha MG10 Owner's Manual - Page 23
Appendix, Specifications - 2 power supply
View all Yamaha MG10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Appendix Specifications I General Specifications Frequency Characteristics (ST OUT) Total Harmonic Distortion (ST OUT) Hum and Noise1 Maximum Voltage Gain2 Monaural/Stereo Input Gain Control Monaural/Stereo High Pass Filter Crosstalk (1 kHz) Monaural/Stereo Input Channel Equalization: Max. Variation3 Monaural/Stereo Input Peak Indicator Level Meters Phantom +48 VDC Power (Balanced input) Included Accessory Option Power Supply Power Consumption Max. Dimensions (W × H × D) Weight Where 0 dBu = 0.775 V and 0 dBV = 1 V 20 Hz-20 kHz +1 dB, -3 dB @+4 dBu, 10 kΩ (with gain control at minimum level) 0.1 % (THD+N) @+14 dBu, 20 Hz-20 kHz, 10 kΩ (with gain control at maximum level) (CHs 1 and 2) -128 dBu Equivalent input noise (CHs 1 and 2) -100 dBu Residual output noise (ST OUT) -87 dBu (91 dB S/N) ST, Master fader at nominal level and all Ch at minimum level. -85 dBu (89 dB S/N) All channel AUX controls at minimum level. -64 dBu (68 dB S/N) ST, Master fader and one Ch fader at nominal level. (CHs 1 and 2) 60 dB CH MIC INPUT → CH INSERT OUT 76 dB CH MIC INPUT → ST OUT 64.2 dB CH MIC INPUT → REC OUT 70 dB CH MIC INPUT → AUX SEND1 (PRE) 76 dB CH MIC INPUT → AUX SEND2 (POST) 76 dB ST CH MIC INPUT → ST OUT 50 dB ST CH LINE INPUT → ST OUT 41 dB ST CH LINE INPUT → AUX SEND1 (PRE) 47 dB ST CH LINE INPUT → AUX SEND2 (POST) 26 dB ST CH INPUT → ST OUT 12 dB AUX RETURN → ST OUT 23.8 dB 2TR INPUT → ST OUT 44 dB variable 80 Hz 12 dB/octave -70 dB between input channels -70 dB between input/output channels (CHs 1 to 6) ±15 dB HIGH 10 kHz shelving MID 2.5 kHz peaking LOW 100 Hz shelving On each channel: red indicator lights if post-EQ signal (on ST channels, if either post-EQ signal or post-mic-amp signal) comes within 3 dB of the clipping level. Two 12-point LED meters [Stereo (L, R)] Peak point: red indicator +5, +3, +1, and 0 points: yellow indicators -1, -3, -5, -7, -10, -15, -20: green indicators Supplied when Phantom +48 V switch is ON. Power adaptor (PA-10) Microphone-stand adaptor (BMS-10A) USA and Canada: Europe: Australia: Korea: 120 V 230 V 240 V 220 V AC, 60 Hz AC, 50 Hz AC, 50 Hz AC, 60 Hz 19 W 251 × 65 × 290.5 mm 1.8 kg 1 Measured with 12.7 kHz, -6 dB/oct. low pass filter (equivalent to 20 kHz, -∞ filter). (CH MIC INPUT to ST, AUX, EFFECT SEND) 2 Turning PAN/BAL to left or right. 3 Shelving turnover/rolloff frequency: 3 dB before maximum cut or boost. MG10/2 23