Yamaha MG8 Owner's Manual - Page 17

• PARAMETER Control Adjusts the parameter (depth, speed, etc.) for the selected effect. NOTE The mixer saves the last value used with each effect type. When you change to a different effect type, the mixer automatically restores the value that was previously used with the newly selected effect (regardless of the current position of the PARAMETER Control knob). These parameter values are retained even after power-off. • ON Switch Switches use of the internal effect on or off. The internal effect is applied only if this switch is turned on. The switch lights up orange to indicate that it is on. With the (separately sold) YAMAHA FC5 foot switch connected, you can use your foot to toggle the digital effects ON and OFF. NOTE When you turn on the power, the ON switch lights up and the internal effector becomes active. • EFFECT RTN Control Adjusts the signal level from the internal digital effector to the STEREO bus. Front & Rear Panels MG8/2FX 17