Yamaha MSP3 Owner's Manual - Page 4

• To relocate the unit, turn the power switch off, remove the power plug from the AC outlet, and remove all connecting cables. Damaged cables may cause fire or electrical shock. • Turn off all musical instruments, and audio equipment when connecting to this unit. Use the correct connecting cables and connect as specified. • Always lower the volume control to minimum before turning on the power to this unit. A sudden blast of sound may damage your hearing. • Do not output distorted sounds for long periods of time, as this will cause the speaker to heat up, leading to a fire hazard. • Do not raise the volume of speakers to a level that makes you feel uncomfortable. Listening to loud music for long periods can damage your hearing. • If you know you will not use this unit for a long period of time, such as when going on vacation, remove the power plug from the AC outlet. Leaving it connected is a potential fire hazard. • To prevent electrical shock when cleaning the unit, remove the power plug from the AC outlet. • XLR-type connectors are wired as follows: pin 1: ground, pin 2: hot (+), and pin 3: cold (-). • This speaker is magnetically shielded. However, if a nearby monitor displays any uneven colors, place it further away from the monitor. • Using a mobile telephone near this unit may induce noise. If noise occurs, use the telephone away from the unit. 4