Yamaha WXC-50 WXC-50 Owner s Manual Advanced - Page 13
For other audio systems, Connecting a power amplifier
View all Yamaha WXC-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
For other audio systems In the following connection setup which connects a Yamaha Hi-Fi amplifier (A-S series) to the unit, when the unit is turned to on or standby, the A-S series amplifier is also turned to on or standby automatically. Note ▪ Turn the unit to standby before flipping the mode switch. ▪ For more information about this trigger function, refer to the Owner's Manual of the A-S series amplifier. (Example) A-S1100 Connecting a power amplifier Connect audio devices without a volume control function such as power amplifiers to the unit. Set the mode switch to PRE AMP. Note ▪ To prevent loud sound or unexpected noise, before connecting a power amplifier, be sure to remove the unit's power cable from the AC wall outlet and turn off the power amplifier. ▪ Turn the unit to standby before flipping the mode switch. Connect a power amplifier to the unit with a commercially available analog stereo pin cable. Monaural mini-plug cable Stereo pin cable (RCA cable) Power amplifier Note Control the volume using the volume knob on the front panel of the unit, the remote control or "MusicCast CONTROLLER". 13 En