Yamaha YAS-152 Owners Manual - Page 13

Settings 3-2 While pointing your TV remote control at the remote control sensor, hold down the mute key for more than 1 second twice or three times. Controlling the sound bar with TV remote control (TV remote control learning function) You can use the TV remote control to turn on/off the sound bar or adjust its volume by having the sound bar learn the TV remote control signals. NOTE • This function is available only when your TV remote control uses infrared signals. • Depending on the installation conditions or settings of the sound bar, both the sound bar and TV will receive the TV remote control signals and operate simultaneously. 1 Turn off the TV and sound bar. 2 Hold down the LEARN key on the supplied remote control for more than 3 seconds to set the sound bar to the learning mode. When the sound bar is in the learning mode, the indicators on the front panel flash as shown below. NOTE • Steps 3 to 6 require only the TV remote control and the keys on the front panel of the sound bar. The remote control of the sound bar is not necessary. 3 Make the sound bar learn the mute operation. 3-1 Press INPUT on the front panel of the sound bar. Approx. 30 cm (1 ft) TV remote control Hold down Release Hold down Release (more than 1 second) (more than 1 second) (more than 1 second) (more than 1 second) Result Bleep/buzzer Indicators Successfully learned Once Lights up Learning has failed * Repeat from Step 3-1. Twice Flash 4 Make the sound bar learn the volume (-) operation. 4-1 Press VOLUME (-) on the front panel of the sound bar. 4-2 While pointing your TV remote control at the remote control sensor, hold down the volume (-) key for more than 1 second twice or three times. Result Bleep/buzzer Indicators Successfully learned Once Learning has failed * Repeat from Step 4-1. Twice Lights up Flash Continued ➜ En 11