Yamaha YDG2030 YDG2030 Owners Manual - Page 13

Y-485 Comm. I/o, Parameter Copy, Software Protect

Get Yamaha YDG2030 PDF manuals and user guides View all Yamaha YDG2030 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

11 - Utilities - Y-485 COMM. I/O Y-485 COMM. I/O Only one parameter is available here: the data which will be recognized by the unit over the Y-485 network. There are three values, selectable with the F encoder: OFF, PGM CHANGE and ALL. When OFF, no Y-485 messages will be recognized by the unit, when PGM CHANGE, only Program Change messages will be recognized by the unit, and when ALL, any data coming over the Y-485 interface will be recognized. NOTE These parameters are entirely independent of any data received at the MIDI ports. PARAMETER COPY This allows you to initialize new equalization settings from a "template" setting and to copy channel settings. The "template" settings allow you to set the 6dB/12dB boost mode. Use the F encoder to decide what setting you will use as the default, and where you will copy it to. There are two "template" settings available: "12dB MODE" and "6dB MODE". Both are stereo 30-band graphic equalizer settings, with one allowing a maximum of ±12dB, and the other ±6dB. Select the "template" you want to use using the F encoder. The "template" will be copied to the edit area. After the "template" settings, turning the F encoder will bring up two more options: from L-DATA to R-DATA and from R-DATA to L-DATA. This allows you to copy from one channel to another. Using the G encoder, you can select what data is to be copied between channels: ALL (self-explanatory), EQ (the graphic equalization settings), FILTER (the notch filter settings), or DELAY/ATT (the delay and attenuation settings). Whatever data you have chosen to copy ("template" or channel data) press the [STORE] key to start the copying process. If you have not set the software protection on, the message "** EXECUTING" will appear briefly on screen as the data is copied. If software protection is on, nothing will appear on screen, and no data will be copied when you press the [STORE] key. SOFTWARE PROTECT Use the F encoder to turn memory protection on or off. When ON, the unit will not respond to Program Change messages received over MIDI or Y-485. You will not be able to store or copy any new or edited equalization settings if protection is ON. "ERR ** NOW PROTECT" will appear on the screen if you try to store data while protection is ON. YDG2030

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
11 – Utilities – Y-485 COMM. I/O
YDG2030
Y-485 COMM. I/O
Only one parameter is available here: the data which will
be recognized by the unit over the Y-485 network. There
are three values, selectable with the
F
encoder: OFF, PGM
CHANGE and ALL. When OFF, no Y-485 messages will be
recognized by the unit, when PGM CHANGE, only Pro-
gram Change messages will be recognized by the unit, and
when ALL, any data coming over the Y-485 interface will
be recognized.
NOTE
These parameters are entirely independent of any data received at the MIDI ports.
PARAMETER COPY
This allows you to initialize new equalization settings from a “template” setting and to copy
channel settings. The “template” settings allow you to set the 6dB/12dB boost mode.
Use the
F
encoder to decide what setting you will use as
the default, and where you will copy it to. There are two
“template” settings available: “12dB MODE” and “6dB
MODE”. Both are stereo 30-band graphic equalizer set-
tings, with one allowing a maximum of
±
12dB, and the
other
±
6dB. Select the “template” you want to use using
the
F
encoder. The “template” will be copied to the edit
area.
After the “template” settings, turning the
F
encoder will
bring up two more options: from L-DATA to R-DATA and
from R-DATA to L-DATA. This allows you to copy from
one channel to another.
Using the
G
encoder, you can select what data is to be cop-
ied between channels: ALL (self-explanatory), EQ (the
graphic equalization settings), FILTER (the notch filter set-
tings), or DELAY/ATT (the delay and attenuation set-
tings).
Whatever data you have chosen to copy (“template” or channel data) press the
[STORE]
key
to start the copying process. If you have not set the software protection on, the message “**
EXECUTING” will appear briefly on screen as the data is copied. If software protection is
on, nothing will appear on screen, and no data will be copied when you press the
[STORE]
key.
SOFTWARE PROTECT
Use the
F
encoder to turn memory protection on or off.
When ON, the unit will not respond to Program Change
messages received over MIDI or Y-485. You will not be able
to store or copy any new or edited equalization settings if
protection is ON. “ERR ** NOW PROTECT” will appear on
the screen if you try to store data while protection is ON.