Yamaha YDP-163 YDP-163_143 Owners Manual - Page 12
Turning the Power On, Setting the Volume, For the Power Adaptor with a Removable Plug
View all Yamaha YDP-163 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Setting Up Turning the Power On 1. Connect the plugs of the AC adaptor in the order shown in the illustration. YDP-163 DC IN jack (page 10) DC plug AC adaptor Power cord AC outlet AC plug YDP-143 WARNING • Make sure to keep the plug attached to the AC adaptor. Using the plug alone can cause electric shock or fire. • Never touch the metallic section when attaching the plug. To avoid electric shock, short circuit or damage, also be careful that there is no dust between the AC adaptor and plug. 2. Press the [1] (Standby/On) switch to turn the power on. [1] (Standby/On) switch DC IN jack (page 10) DC plug AC adaptor AC outlet The shape of the plug and outlet differ depending on the locale. WARNING Use the specified adaptor (page 34) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTE Follow this procedure in reverse order when disconnecting the AC adaptor. For the Power Adaptor with a Removable Plug Do not remove the plug from the power adaptor. If the plug is removed accidentally, slide the plug into place without touching the metallic parts, and then push the plug in completely until it clicks. Plug Slide the plug as indicated The shape of the plug and outlet differ depending on the locale. 12 YDP-163/YDP-143 Owner's Manual Power indicator Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you're ready to turn the power to standby, press the [1] (Standby/On) switch again for a second. The power indicator turns off. CAUTION Even when the [1] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. Setting the Volume When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound. Level decreases Level increases CAUTION Do not use this instrument at a high volume level for a long period of time, to avoid damaging your hearing.