Zenith SL-4132-MW User Guide - Page 5
Complete The Installation
UPC - 016963413221
View all Zenith SL-4132-MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
COMPLETE THE INSTALLATION ❒ Stuff the wires into the junction box. Make sure the wires from the fixture go through the wire path, and no wires get pinched. 4162 Top Assembly Larger piece on top Slide the fixture onto the mounting screws and tighten nuts. Junction Box ❒ Caulk fixture mounting surface with silicone weather sealant. ❒ Install light bulb. See fixture markings for proper bulb type and wattage. ❒ If so equipped, install the fixture top.Secure with decorative screws. ❒ If you will not be installing the optional tail assembly, install the decorative nut onto the bottom of the fixture now. Optional Assembly ❒ If so equipped, you may install the decorative tail as shown below. Hex nut 1. Screw in extension bar. Bottom trim piece has drain hole 2. Add tail piece and trim. 3. Install decorative nut. 595-5530-13