Zenith XBV443 Operating Guide - Page 29

DVD Operation (Continued) OPERATION General Features (Continued) Marker Search DVD 1/9 MARKER SEARCH You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear on the TV screen briefly. 2 Repeat step 1 to enter up to nine Marker points on a disc. To Recall a Marked Scene 1 During disc playback, press SEARCH. The Marker Search menu will appear on the screen. 2 Within 10 seconds, use 1/2 or number button to select a Marker number that you want to recall. 3 Press ENTER. Playback will start from the Marked scene. 4 To remove the MARKER SEARCH menu, press SEARCH. To Clear a Marked Scene 1 During disc playback, press SEARCH. The Marker Search menu will appear on the screen. 2 Within 10 seconds, use 1/2 or number button to select a Marker number that you want to erase. 3 Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. All markers are erased when the disc is ejected. Changing Video Mode DVD With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. Video mode sequence: MODE1 → MODE2 → MODE3 → MODE1 If you turn off the power, the video mode will return to initial default state (MODE1). Detailed Description of each Video Mode MODE1 : The source material of the DVD video (film material or video material) is determined from disc information. MODE2 : Suitable for playing film based content or video based material recorded by the progressive scan method. MODE3 : Suitable for playing video based content with comparatively little motion. ote The video mode setting only works when the Progressive Scan option is set to "On" in the Setup menu. Special DVD Features Checking the contents of DVD Video discs: Menus DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option. Or, use b/B/v/V buttons to highlight your selection, then press ENTER. Title Menu DVD 1 Press TITLE. If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear. 2 The menu can list camera angles, spoken language and subtitle options, and chapters for the title. 3 To remove the title menu, press TITLE again. Disc Menu DVD 1 Press DISC MENU. The disc menu is displayed. 2 To remove the disc menu, press DISC MENU again. Camera Angle DVD 1 /1 If the disc contains sequences recorded from different camera angles, the angle icon blinks on the TV screen. You can then change the camera angle if you wish. Press ANGLE repeatedly during playback to select a desired angle. The number of the current angle appears on the display. Changing the Audio Language DVD 1 ENG D 5.1 CH Press AUDIO repeatedly during playback to hear a different audio language or audio track. Subtitles DVD ABC 1 ENG Press SUBTITLE repeatedly during playback to see the different subtitle languages. ote If appears, the feature at that moment or with that specific DVD. 29