ZyXEL ES-2108PWR User Guide - Page 118
Broadcast Storm Control, ES-2108 Series User's Guide, Advanced Application > Broadcast
View all ZyXEL ES-2108PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 13 Broadcast Storm Control Table 30 Advanced Application > Broadcast Storm Control (continued) LABEL DESCRIPTION * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Active Rate Apply Cancel Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to enable broadcast storm control on the port. Clear this check box to disable the feature. Specify the traffic a port receives in Kilobits per second (Kbps). If you enter a number between 64 and 1728, the Switch automatically rounds the number down to the nearest multiple of 64. If you enter a number between 1729 and 1999, the rate is fixed at 1792. If you enter a number between 2000 and 103999, the Switch rounds the number down to the nearest multiple of 1000. On a Gigabit Ethernet/ Mini-GBIC slot, the Switch rounds a number down to the nearest multiple of 8000 for a number between 104000 and 1000000. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 118 ES-2108 Series User's Guide