ZyXEL NBG4615 v2 User Guide - Page 62
Router Mode, NBG4615 v2 User's Guide
View all ZyXEL NBG4615 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 7 Router Mode Table 26 Navigation Panel: Router Mode (continued) LINK TAB FUNCTION Remote WWW Management Use this screen to configure through which interface(s) and from which IP address(es) users can use HTTP to manage the NBG4615 v2. Telnet Use this screen to configure through which interface(s) and from which IP address(es) users can use Telnet to manage the NBG4615 v2. Wake On LAN Use this screen to enable Wake on LAN to remotely turn on a device on the local network. UPnP General Use this screen to enable UPnP on the NBG4615 v2. MAINTENANCE General General Use this screen to view and change administrative settings such as system and domain names. Password Password Setup Use this screen to change the password of your NBG4615 v2. Time Time Setting Use this screen to change your NBG4615 v2's time and date. Firmware Upgrade Firmware Upgrade Use this screen to upload firmware to your NBG4615 v2. Backup/ Restore Backup/ Restore Use this screen to backup and restore the configuration or reset the factory defaults to your NBG4615 v2. Restart System Restart This screen allows you to reboot the NBG4615 v2 without turning the power off. Language Language This screen allows you to select the language you prefer. Sys OP Mode Sys OP Mode This screen allows you to select whether your device acts as a router, an access point, a universal repeater or a wireless client. 62 NBG4615 v2 User's Guide