ZyXEL P-2812HNU-51c User Guide - Page 133
The WPS Screen
View all ZyXEL P-2812HNU-51c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 6 Wireless Table 22 Wireless > More AP: Edit (continued) LABEL DESCRIPTION Wireless Network Name (SSID) The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated. Wireless devices associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN. Hide SSID BSSID Security Level Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. This shows the MAC address of the wireless interface on the Device when wireless LAN is enabled. Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as the Device. After you select to use a security, additional options appears in this screen. Or you can select No Security to allow any client to associate this network without any data encryption or authentication. See Section 6.2.1 on page 127 for more details about this field. Apply Back Click Apply to save your changes. Click Back to exit this screen without saving. 6.4 The WPS Screen Use this screen to configure WiFi Protected Setup (WPS) on your Device. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Set up each WPS connection between two devices. Both devices must support WPS. See Section 6.7.6.3 on page 144 for more information about WPS. Note: The Device applies the security settings of the SSID1 profile (see Section 6.2 on page 125). If you want to use the WPS feature, make sure you have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security. P-2812HNU(L)-Fx Series User's Guide 133