ZyXEL P-2812HNU-51c User Guide - Page 95
Broadband, P-2812HNUL-Fx Series User's Guide
View all ZyXEL P-2812HNU-51c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 5 Broadband Table 7 Broadband Add/Edit: Routing- PPPoE (VDSL) (continued) LABEL DESCRIPTION Use Static IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. Select this if you want to get a dynamic IP address from the ISP. IP Address Enter the static IP address provided by your ISP. Routing Feature NAT Enable Select this option to activate NAT on this connection. IGMP Proxy Enable Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data. Select this option to have the Device act as an IGMP proxy on this connection. This allows the Device to get subscribing information and maintain a joined member list for each multicast group. It can reduce multicast traffic significantly. Apply as Default Gateway Select this option to have the Device use the WAN interface of this connection as the system default gateway. DNS Server The section is not available when you select Bridge in the WAN Service Type field. Obtain DNS info Automatically Select this to have the Device get the DNS server addresses from the ISP automatically. Use the following Static DNS IP Address Select this to have the Device use the DNS server addresses you configure manually. Primary DNS Server Enter the first DNS server address assigned by the ISP. Secondary DNS Server Enter the second DNS server address assigned by the ISP. IPv6 Address This section is not available when you select Disable in the IPv6/IPv4 DualStack field. Obtain IPv6 Address Automatically Select this option if you want to have the Device use the IPv6 prefix from the connected router's Router Advertisement (RA) to generate an IPv6 address. Enable Prefix Delegation Select this to enable Prefix Delegation. This enables an IPv6 router to use the IPv6 prefix (network address) received from the ISP (or a connected uplink router) for its LAN. Static IPv6 Address Select this option if you have a fixed IPv6 address assigned by your ISP. IPv6 Address Enter the static IPv6 address provided by your ISP using colon (:) hexadecimal notation. Prefix length Enter the bit number of the IPv6 subnet mask provided by your ISP. IPv6 Default Gateway Enter the IPv6 address of the default outgoing gateway using a colon (:) hexadecimal notation. 6to4 Tunneling Select 6to4 if the Device is connected to a network that has both IPv6 and IPv4 and the IPv4 addresses are public IP addresses. In this mode, the Device can convert an IPv4 address directly to an IPv6 address. The format is: 2002:[IPv4 address in hexadecimal]::/48 If you select this option, the fields shown in Figure 18 appear. P-2812HNU(L)-Fx Series User's Guide 95