ZyXEL P-335U User Guide - Page 165
VPN Global Setting, Telecommuter VPN/IPSec Examples
View all ZyXEL P-335U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
P-334U/P-335U User's Guide The following table describes the labels in this screen. Table 55 SECURITY > VPN > SA Monitor LABEL DESCRIPTION # This is the security association index number. Name This field displays the identification name for this VPN policy. Encapsulation This field displays Tunnel or Transport mode. IPSec Algorithm This field displays the security protocols used for an SA. Both AH and ESP increase ZyXEL Device processing requirements and communications latency (delay). Refresh Click Refresh to display the current active VPN connection(s). 13.9 VPN Global Setting Click SECURITY > VPN > Global Setting to open the VPN Global Setting screen. Use this screen to change settings that apply to all of your VPN tunnels. Figure 96 Security > VPN > Global Setting The following table describes the labels in this screen. Table 56 Security > VPN > Global Setting LABEL DESCRIPTION Windows Networking (NetBIOS over TCP/IP) NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that enable a computer to find other computers. It may sometimes be necessary to allow NetBIOS packets to pass through VPN tunnels in order to allow local computers to find computers on the remote network and vice versa. Allow NetBIOS Traffic Select this check box to send NetBIOS packets through the VPN connection. Through IPSec Tunnel Apply Click Apply to save your changes back to the ZyXEL Device. Reset Click Reset to begin configuring this screen afresh. 13.10 Telecommuter VPN/IPSec Examples The following examples show how multiple telecommuters can make VPN connections to a single ZyXEL Device at headquarters. The telecommuters use IPSec routers with dynamic WAN IP addresses. The ZyXEL Device at headquarters has a static public IP address. Chapter 13 IPSec VPN 165