ZyXEL P-335U User Guide - Page 71
No Security
View all ZyXEL P-335U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Figure 34 Wireless General P-334U/P-335U User's Guide The following table describes the general wireless LAN labels in this screen. Table 23 Wireless General LABEL Enable Wireless LAN Name(SSID) Hide SSID Channel Selection Auto Channel Selection Operating Channel Apply Reset DESCRIPTION Click the check box to activate wireless LAN. (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Set the operating frequency/channel depending on your particular region. Select a channel from the drop-down list box. The options vary depending on whether you are using A or B/G frequency band and the country you are in. This field is not available when you select Auto Channel Selection. Refer to the Connection Wizard chapter for more information on channels. Select the check box to have the ZyXEL Device automatically scan for and select a channel which is not used by another device. This displays the channel the ZyXEL Device is currently using. Click Apply to save your changes back to the ZyXEL Device. Click Reset to reload the previous configuration for this screen. See the rest of this chapter for information on the other labels in this screen. 4.3.1 No Security Select No Security to allow wireless stations to communicate with the access points without any data encryption. Chapter 4 Wireless LAN 71