ZyXEL P-335U User Guide - Page 193
Installing UPnP in Windows Example
View all ZyXEL P-335U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
P-334U/P-335U User's Guide The following table describes the labels in this screen. Table 74 Configuring UPnP LABEL DESCRIPTION Enable the Universal Select this checkbox to activate UPnP. Be aware that anyone could use a Plug and Play (UPnP) UPnP application to open the web configurator's login screen without entering feature the ZyXEL Device's IP address (although you must still enter the password to access the web configurator). Allow users to make configuration changes through UPnP Select this check box to allow UPnP-enabled applications to automatically configure the ZyXEL Device so that they can communicate through the ZyXEL Device, for example by using NAT traversal, UPnP applications automatically reserve a NAT forwarding port in order to communicate with another UPnP enabled device; this eliminates the need to manually configure port forwarding for the UPnP enabled application. Allow UPnP to pass through Firewall UPnP broadcasts are only allowed on the LAN. If you block LAN-to-LAN/ZyXEL Device traffic using the firewall, then you need to select this check box to allow UPnP-enabled traffic to pass through the firewall. This setting remains active until you disable UPnP. Clear this check box if you do not want to create a hole in the firewall for UPnP application packets (for example, MSN packets). Apply Click Apply to save your changes back to the ZyXEL Device. Reset Click Reset to begin configuring this screen afresh. 17.4 Installing UPnP in Windows Example This section shows how to install UPnP in Windows Me and Windows XP. 17.4.1 Installing UPnP in Windows Me Follow the steps below to install UPnP in Windows Me. Chapter 17 UPnP 193