ZyXEL PLA450 v2 Quick Start Guide - Page 12

ENCRYPT, PRESS, WITHIN, If the HomePlug

Page 12 highlights

. A PRESS 10 SEC. ENGLISH BB PRESS 2 SEC. WITHIN 120 SEC. C PRESS 2 SEC. 4 While the devices are connecting, the power ( ) and HomePlug ( ) lights blink. Also several times all lights blink at the same time and the HomePlug ( ) light shows red. 5 Wait for about one minute while your powerline devices connect. The power ( ) light is steady when the ENCRYPT process times out, the HomePlug ( ) light is steady if you have a successful connection. V If the power ( ) light does not blink, you have probably pressed the ENCRYPT button for too long. Try again, pressing the ENCRYPT button for 1~2 seconds. V If the HomePlug ( ) lights on both powerline devices do not light up, the powerline devices are not connected. Repeat steps 2 and 3 in this section. If that doesn't work, see the User's Guide for more suggestions. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103

ENGLISH
12
.
4
While the devices are connecting, the power (
) and HomePlug (
) lights blink. Also
several times all lights blink at the same time and the HomePlug (
) light shows red.
5
Wait for about one minute while your powerline devices connect. The power (
) light is
steady when the ENCRYPT process times out, the HomePlug (
) light is steady if you
have a successful connection.
If the power (
) light does not blink, you have probably pressed the
ENCRYPT
button for too long. Try again, pressing the
ENCRYPT
button for
1~2 seconds.
If the HomePlug (
) lights on both powerline devices do not light up, the
powerline devices are not connected. Repeat steps 2 and 3 in this
section. If that doesn’t work, see the User’s Guide for more suggestions.
120 SEC.
PRESS
2 SEC.
WITHIN
PRESS
10 SEC.
A
B
C
PRESS
2 SEC.