ZyXEL WAC5302D-S User Guide - Page 39
Nwa5123-ac, Color, Status, Description
View all ZyXEL WAC5302D-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 3 Hardware Table 10 NWA1123-AC HD LED (continued) COLOR STATUS White Steady On Blue Red Slow Blinking (On for 100ms per second) Slow Blinking (Blink for 1 time, Off for 1 second) On Fast Blinking (On for 50 milliseconds, Off for 50 milliseconds) Slow Blinking (Blink for 3 times, Off for 3 seconds) DESCRIPTION The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in limited power mode (see Table 26 on page 67). Locator LED is on. It switches off automatically after the configured amount of time (1-60min). Default duration is 10 minutes. The Zyxel Device is performing a Channel Availability Check (CAC) with Dynamic Frequency Selection (DFS) to monitor a channel for radar signals. The Zyxel Device failed to boot up or is experiencing system failure. The Zyxel Device is undergoing firmware upgrade. The Uplink interface of the Zyxel Device is down. 3.2.4 NWA5123-AC The following are the LED descriptions for your NWA5123-AC. Figure 16 NWA5123-AC LED NWA/WAC/WAX Series User's Guide 39