ZyXEL WAC5302D-S User Guide - Page 42
Zyxel Device Models With Multiple LEDs, 3.3.1 NWA1123-AC PRO
View all ZyXEL WAC5302D-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 3 Hardware Table 12 NWA110AX, WAX510D and WAX650S LED (continued) COLOR STATUS DESCRIPTION Amber Steady On The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device in limited power mode (see Table 26 on page 67). Bright Blue Steady On The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in full power mode (see Table 26 on page 67). White Steady On The Zyxel Device's wireless interface is activated, but there are no wireless clients connected when it is in limited power mode (see Table 26 on page 67). Slow Blinking (On for 100ms per second) Locator LED is on. It switches off automatically after the configured amount of time (1-60min). Default duration is 10 minutes. Blue Slow Blinking (Blink for 1 time, Off for 1 second) The Zyxel Device is performing a Channel Availability Check (CAC) with Dynamic Frequency Selection (DFS) to monitor a channel for radar signals. Red On The Zyxel Device failed to boot up or is experiencing system failure. Fast Blinking (On for 50 milliseconds, Off for 50 milliseconds) The Zyxel Device is undergoing firmware upgrade. Slow Blinking (Blink for 3 times, Off for 3 seconds) The Uplink port of the Zyxel Device in standalone mode is disconnected. 3.3 Zyxel Device Models With Multiple LEDs The LEDs of some Zyxel Device models can be controlled by using the suppression feature such that the LEDs stay lit (ON) or OFF after the Zyxel Device is ready. Some Zyxel Device models also has Locator LED which allows you to see the actual location of the Zyxel Device among several devices in the network. See Section 1.4 on page 19 to check which models support these features. Refer to Chapter 21 on page 219 for the LED Suppression and Locator menus in standalone mode. The following models have multiple LEDs: NWA1123-AC PRO, NWA1302-AC, WAC6103D-I, WAC5302D-S, WAC6502D-E, WAC6502D-S, WAC6503D-S. 3.3.1 NWA1123-AC PRO The following are the LED descriptions for your NWA1123-AC PRO. NWA/WAC/WAX Series User's Guide 42