eMachines E22T6W User Manual - Page 18
Using the main menu
View all eMachines E22T6W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using Your eMachines Flat-Panel Monitor 2 To use an eTouch button, lightly touch it. For adjusting a setting's values, you can touch and hold the buttons as you would press and hold conventional buttons. • Touch (Source) to select the type of input (DVI or VGA) when both DVI and VGA are connected to your monitor. (When only one video source is connected, you do not need to select the source.) • Touch (Auto) to automatically adjust your display image to the ideal settings. (Available only in VGA mode.) • Touch (Information) to display current screen resolution and input source. • Touch (Cancel) to exit the shortcut menu. • Touch (Main Menu) to open the main menu. • To turn off the button icons and close the menu, wait about 15 seconds without touching a button. Using the main menu To use the main menu: 1 Touch the (Menu) button on the front of your monitor. The rest of the button icons light up and the shortcut menu opens. Important The eTouch menu buttons are very sensitive, and may be "pressed" by holding your finger just above its surface. To completely "release" a touch button, make sure that you lift your finger well away from the button. 2 To use a button, lightly touch its icon. For adjusting a setting's values, you can touch and hold the buttons as you would press and hold conventional buttons. 3 Touch (Main Menu). The main menu opens. Tip Button labels on the eMenu screens align with the eTouch buttons on the front of the monitor. 4 Touch the (Previous and Next) buttons to highlight a setting, then touch (Select) to open the selected menu or setting. The on-screen button labels change to indicate changed button functionality. (The following graphic shows typical labels.) Back (availability depends on the current menu) Select Previous Next Menu Off 5 Touch the (Increase or Decrease) buttons to adjust the setting or change the option. 14