2009 Acura MDX Owner's Manual - Page 162

Main Menu Table Of Contents Driving Position Memory System Doing any of the following after pressing the MEMO button will cancel the storing procedure. ● Selecting a Memorized Position To select a memorized position, do this: 1. Make sure the vehicle is parked. 2. Press the desired memory button (1 or 2) until you hear a beep, then release the button. The system will move the seat, steering wheel, and outside mirrors to the memorized positions. The indicator in the selected memory button will flash during movement. When the adjustments are complete, you will hear two beeps, and the indicator will remain on. To change the ''MEMORY POSITION LINK'' setting, see page 98. To stop the system's automatic adjustment, do any of these actions: ● Not pressing a memory button within 5 seconds. Readjusting the seat position. Readjusting the outside mirror position. Press any button on the control panel: MEMO, 1, or 2. Push any of the adjustment switches for the seat. Shift out of Park. Adjust the outside mirrors. ● ● ● ● ● Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. If desired, you can use the adjustment switches to change the positions of the seat, steering wheel or outside mirrors after they are in their memorized position. If you change the memorized position, the indicator in the memory button will go out. To keep this driving position for later use, you must store it in the driving position memory. 158 2009 MDX