2009 Acura MDX Owner's Manual - Page 55

Main Menu Table Of Contents Installing a Child Seat Installing a Child Seat with a Tether A child seat with a tether can be installed in any seating position in the second or third row. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. 4. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure. To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt. 5. Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps. To deactivate the lockable retractor and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract. Driver and Passenger Saf ety CONTINUED 2009 MDX 51