2010 Acura TL Owner's Manual - Page 466
2010 Acura TL Manual
Page 466 highlights
Starting the Engine (Models with Keyless Access System) Your vehicle's starting system has an auto control mode. When you have your keyless access remote and push the engine start/stop button while depressing the brake pedal (A/T) or clutch pedal (M/T), this feature keeps the engine's starter motor running until the engine starts. Follow these instructions to start the engine: 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The power mode from ON to START does not function unless the clutch pedal is pressed. Automatic transmission: In either of the following cases, you should insert the keyless access remote into the keyless remote slot. For more information, see pages 188 and 189 . The keyless access remote system main switch is off. The keyless access remote battery becomes weak or dead. 4. Without touching the accelerator pedal, push and release the engine start/stop button. You do not need to hold the engine start/stop button to start the engine. Depending on the outside temperature, the starter motor runs for about 6 to 9 seconds until the engine starts. If you hold the engine start/stop button for more than 7 seconds, the starter motor, depending on the outside temperature, runs for about 10 to 25 seconds until the engine starts. If the engine does not start, wait at least 10 seconds before trying again. The immobilizer system protects your vehicle f rom thef t. If an improperly coded keyless access remote (or other device) is used, the engine's f uel system is disabled. For more inf ormation, see page 143 . Driving The engine is harder to start in cold weather. Also, the thinner air f ound at altitudes above 8,000 f eet (2,400 meters) adds to this problem. Make sure the shift lever is in Park. Press on the brake pedal. 463 2010 TL