2010 Acura TL Owner's Manual - Page 551

Changing a Flat Tire JACK WHEEL NUT WRENCH EXTENSION WHEEL NUT WRENCH JACKING POINT 4. Take the tool case out of the spare tire. 5. Unscrew the wing bolt and take the spare tire out of its well. 6. Take the jack out of the tool kit case. 7. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 8. Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 548 2010 TL