2011 Acura MDX Owner's Manual - Page 161

Seat Heaters, Seat Heaters and Seat Ventilation In the HI setting, the heater turns off when the seat gets warm, and turns back on after the seat's temperature drops. In the LO setting, the heater runs continuously. It does not cycle with temperature changes. Follow these precautions when using the seat heaters: ● Seat Heaters and Seat Ventilation Passenger's seat VENTS FRONT SEAT HEATER AND SEAT VENTILATION SWITCHES INDICATOR Instruments and Controls Use the HI setting only to heat the seats quickly, because it draws large amounts of current from the battery. If the engine is left idling for an extended period, do not use the seat heaters even on the LO setting. It can weaken the battery, causing hard starting. HEATERS Driver's seat If equipped ● Both front seats are equipped with seat heaters and an air ventilation system. The passenger seat only has heaters in the seat bottom because of the side airbag system. The ignition switch must be in the ON (II) position to use the heaters and the air ventilation system. To use the heaters, press the button. The indicator (red) next to the button will come on. There are four settings in the heaters: HI － Three indicators on. MID － Two indicators on. LO － One indicator on. OFF － All indicators off. A multi-information display message may inform you when the battery charge is getting low. See page 82 for more information. CONTINUED 157 2011 MDX