2011 Acura MDX Owner's Manual - Page 162

Seat Heaters and Seat Ventilation, Power Windows Pressing the button while the heater is running will switch the system to the HI setting air ventilation mode. To ventilate the seat, press the button. The indicator (blue) next to the button will come on. The air ventilation system has four settings: HI － Three indicators on. MID － Two indicators on. LO － One indicator on. OFF － All indicators off. Pressing the button while the air ventilation is running will switch the system to the HI setting heater mode. Follow these precautions whenever you use the seat heaters and the seat ventilation: • If the engine is left idling for an Power Windows DRIVER'S WINDOW SWITCH MAIN SWITCH extended period, do not use the seat heaters, even on the LO setting. It can weaken the battery, causing hard starting. A multi-information display message may inform you when the battery charge is getting low. See page 82 for more information. Turn the ignition switch to the ON (II) position to raise or lower any window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window. 158 2011 MDX