2011 Acura MDX Owner's Manual - Page 528

Lights Replacing Front Fog/Daytime Running Light Bulbs Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. HOLDING CLIP BOLT HOLDING CLIP SCREW Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. 1. To change the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger's side, turn the steering wheel to the left. 2. Remove the bolt and use the flattip screwdriver to remove the holding clips located under the front bumper. 3. Use a flat-tip screwdriver to remove the holding clip from the inner fender, and remove the screw with a Phillips-head screwdriver. 4. Pull the inner fender cover away from the fender and bumper. 524 2011 MDX