2013 Acura RDX Owner's Manual - Page 161

uu Audio System u Audio System Theft Protection QRG Audio System Theft Protection The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. 1 Audio System Theft Protection 2013 RDX ■ Reactivating the audio system 1. Set the power mode to ON, and turn on the audio system. u If you set the power mode to ACCESSORY, you will be requested to enter the audio security code. See step 3. 2. Press and hold the power button again for more than two seconds. u The audio system is reactivated when the system's control unit recognizes that the system is in your vehicle. If the control unit fails to recognize, ENTER CODE appears on the audio/ information screen. 3. Enter the audio security code using the preset buttons. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset. Find the audio system's security code and serial number label in your owner's manual kit. We recommend that you write down the serial number in this owner's manual. Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code. You can find out about your serial number and security code from a dealer. U.S. models TOC Features You can register the security code at My Acura (owners.acura.com.), and find information on how to retrieve the serial number and obtain the code at radio-navicode.acura.com. Index 160