2013 Acura RDX Owner's Manual - Page 226

Compass * 2013 RDX QRG When you set the power mode to ON, the compass self-calibrates, and the compass display appears. 1 Compass * Compass operation can be affected under the following conditions: • Driving near power lines or stations • Crossing a bridge • Passing a large vehicle, or driving near a large object that can cause a magnetic disturbance • When accessories such as antennas and roof racks are mounted by magnets 1 Compass Calibration Calibrate the compass in an open area. While setting the compass: • The BACK button returns to the previous screen. • The SETUP button cancels the setting mode. Compass Calibration If the compass indicates the wrong direction, or the CAL. indicator blinks, you need to manually calibrate the system. 1. Set the power mode to ON. 2. Press and hold the SETUP button until the display shows the compass setting menu. 3. Rotate . Compass Setting Menu Items to select Calibration, then press TOC Features 4. When the display changes to Calibration Start, press . 5. Drive the vehicle slowly in two circles. u The compass starts to show a direction after the calibration. The CAL. indicator goes off. Index * Not available on all models 225