2013 Acura RDX Owner's Manual - Page 288
2013 Acura RDX Manual
Page 288 highlights
Replacing Light Bulbs Headlight Bulbs When replacing, use the following bulbs. High beam headlight: Low beam headlight: 60 W (HB3) 55W (H11 for halogen bulb type) 35W (D2S for high voltage discharge type) 1 Headlight Bulbs NOTICE 2013 RDX QRG Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area or tow a trailer, have the aiming readjusted at a dealer or by a qualified technician. The HB3 and H11 types are halogen bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. The exterior lights' inside lenses (headlights, brake lights, etc.) may fog temporarily after a vehicle wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer. ■ High Beam Headlight Bulb 1. Push the tab to remove the coupler. 2. Rotate the old bulb to the left to remove. 3. Insert a new bulb into the headlight assembly and turn it to the right. 4. Insert the coupler into the connector of the bulb. Coupler Tab Models with high voltage discharge tube bulbs TOC Maintenance ■ Low Beam Headlights High voltage can remain in the circuit for a long period of time after the light is switched off. Do not attempt to inspect or replace the high voltage discharge type bulbs yourself. Ask a dealer to inspect and replace low beam headlights. Index Continued 287