2007 BMW M6 Owner's Manual - Page 58

Adjusting 1. Press the button. This opens the start menu. 4. Select the desired function. 5. Press the controller. 2. Press the controller to open the menu. 3. Select "MDrive" and press the controller. 6. Turn the controller to select the desired setting. The functions contained in MDrive are displayed: > "SMG Drivelogic" Sequential Manual Transmission with Drivelogic: shifting modes and Drivelogic driving programs, refer to page 64 > "EDC" Programs of the Electronic Damping Control, refer to page 86 > "DSC" Dynamic Stability Control and M Dynamic Mode, refer to page 84 > "POWER" Programs of the M Engine Dynamics Control, refer to page 65 > "Head-Up Display"* Views of the Head-Up Display, refer to page 94 You can reset all settings for MDrive to their default values: > "Reset to default" "Unchanged" retains the current setting made outside of MDrive. 7. Press the controller. The setting is stored for the remote control currently in use. Activating settings Press the button on the steering wheel. The indicator lamp in the instrument cluster lights up. The settings made on the Control Display for the functions contained in MDrive are active. Pressing the button again deactivates MDrive. If the indicator lamp flashes after the button was pressed, MDrive was unable to respond because the ABS Antilock Brake System or DSC Dynamic Stability Control are currently regulating driving stability. Press the button again when the indicator lamp no longer flashes.< Even with MDrive activated, you can change individual settings outside MDrive, e.g. with the 56 Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG