2007 BMW M6 Owner's Manual - Page 87
2007 BMW M6 Manual
Page 87 highlights
5. Select "M Dynamic Mode" and press the controller. Press the DSC OFF button; the DSC indicator lamp lights up continuously. DSC and MDM are deactivated. A message appears on the Control Display. Please note any supplementary information that appears there. Manual transmission*: Press and hold the MDM button. Under unfavorable traction conditions, the engine output may be briefly reduced even when DSC is deactivated. You can also activate and deactivate the M Dynamic Mode with the MDM button. Reactivating DSC Press the DSC OFF button; the indicator lamp in the instrument cluster goes out. You can also activate and deactivate DSC with the button on the steering wheel, refer to MDrive on page 55. Manual transmission*: Press the MDM button. Press the button on the steering wheel or the MDM button* again; the MDM indicator lamp goes out. Deactivating DSC* To maintain vehicle stability, drive with the system activated whenever possible.< When rocking free or starting off from deep snow or on loose road surfaces, it can be useful to briefly deactivate DSC. Malfunction in driving-stability control systems The warning lamp for the brake system lights up yellow, together with the indicator lamps for ABS, DSC, and for the Tire Pressure Monitor or Flat Tire Monitor. A message appears on the Control Display. The driving stability control systems have failed. While you may continue, you should remember to proceed cautiously and drive defensively while avoiding full brake applications. The Tire Pressure Monitor or the Flat Tire Monitor is also malfunctioning. Have the system checked as soon as possible. 85 Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG Reference Mobility Communications Entertainment Deactivating MDM again Navigation Driving tips Controls At a glance