2007 BMW M6 Owner's Manual - Page 90

Technology for comfort, convenience and safety sage "Initializing FTM ..." appears on the Control Display for a few seconds. 6. Start the engine, but do not start driving. 7. Select "Reset" and press the controller. 8. Select "Yes" and press the controller. 3. Start to drive. The initialization finishes during driving without feedback. Via iDrive, for operating principle refer to page 16: 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. The message "resetting FTM ..." is displayed for a few seconds. The warning lamp in the instrument cluster lights up yellow for a few seconds. 9. Start to drive. The initialization finishes during driving without feedback. Indication of a flat tire The warning lamp lights up red. A message appears on the Control Display. In addition, an acoustic signal sounds. There is a flat tire or extensive inflation pressure loss. 1. Reduce speed and stop the vehicle carefully. Avoid sudden braking and steering maneuvers. 2. Identify damaged tire. To do this, check the tire inflation pressure using the M Mobility System, refer to Producing tire inflation pressure on page 228. 3. Repair flat tire with M Mobility System, refer to page 226, or replace the damaged wheel, refer to Changing wheels on page 228. 3. Turn the controller until "Settings" is selected and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "FTM" is selected and press the controller. TPM Tire Pressure Monitor* The concept TPM checks the tire inflation pressure in the four mounted tires. The system reports when the tire inflation pressure has dropped considerably in one or several tires. 88 Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG