2008 BMW Z4 M Series Owner's Manual - Page 35
2008 BMW Z4 M Series Manual
Page 35 highlights
Convenience function 1. Unlock and open the driver's door or turn the key to position 1, refer to page 40. 2. Press memory button 1, 2 or 3 briefly. Movement stops when one of the seat adjustment or memory buttons is operated during the adjustment process. You can have this feature programmed so that after you use the remote control from your personalized key to unlock your door, your seat will move into your own preferred position.< Safety belts At a glance Reference Mobility Driving tips Controls Comply with the instructions on page 30, or the occupants' personal safety will be diminished.< Make sure every occupant fastens his or her safety belt. As supplemental restraint devices, the airbags are designed to enhance the effectiveness of the safety belts, and not to replace them. Safety function 1. Close the driver's door and turn the key to position 0 or 2. 2. Press the desired memory button 1, 2 or 3 until the adjustment process is completed. If you press the MEMORY button accidentally: Press the button again; the LED goes out. Before activating the programmed adjustment feature, ensure that the space behind the driver's seat is empty and unobstructed. If you fail to do so, objects behind the seat could be damaged, should the seat move backward.< To fasten Make sure you hear the lock engage in the belt buckle. The upper belt anchor is suitable for adults of any stature as long as the seat is adjusted properly, refer to page 31. To unlock 1. Grasp the belt firmly. 2. Press the red button in the buckle. 3. Guide the belt back into its reel. Seat heating* 'Fasten safety belts' reminder The indicator lamp flashes or lights up. A signal also sounds. Check whether the safety belt has been fastened correctly. The 'Fasten safety belts' reminder is issued as long as the driver's safety belt has not been fastened. The 'Fasten safety belts' reminder is also activated at road speeds above approx. 5 mph/ 8 km/h if the passenger's safety belt is not fastened, if heavy objects are placed on the passenger seat, or if driver or passenger unfasten their safety belts. The seat cushion and backrest can be heated with the ignition key in position 2. Press once for each temperature level. Three LEDs indicate the highest temperature. To switch off: Press button longer. 33 Online Edition for Part no. 01 41 0 014 500 - © 08/07 BMW AG