2005 Buick LaCrosse Owner's Manual - Page 122

Turn and Lane-Change Signals To signal a turn, move the lever up or down. The lever returns to its original position when the turn is completed. An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. Headlamp High/Low-Beam Changer To change the headlamps from low beam to high beam, push the turn signal/multifunction lever away from you. When the high beams are on, a light on the instrument panel cluster also will be on if the ignition is in ON. To signal a lane change, raise or lower the lever until the arrow starts to flash. Hold it there until the lane change is completed. The lever will return to its original position when released. Arrows that flash rapidly when signaling for a turn or lane change, or that fail to work, may indicate a burned-out signal bulb or fuse. Other drivers will not see the signal. See Front Turn Signal and Parking Lamps on page 5-47 and Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps on page 5-48 for turn signal bulb replacement procedures. Also see Fuses and Circuit Breakers on page 5-88 for location of fuses. A chime will sound if the turn signal is left on for more than 3/4 mile (1.2 km). To change the headlamps from high beam to low beam, pull the turn signal lever toward you. Flash-to-Pass This feature lets you use your high-beam headlamps momentarily to signal a driver in front of you that you want to pass. To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. 3-8